XTA Manifold Flexible Valve Station with 3 - 12 port connections
High inert: ETFE, PTFE and FFKM (optional ETFE and FPM or EPDM)
This manifold solution is equipped with 2/2-way XTA or WTA valves and can be equipped with 3 to 12 valves.
The injection moulded blocks made of ETFE (fluorocarbon polymer) result in high chemical resistance and an economically optimised production method.
Various configuration options allow the use in a wide range of applications.
The standard nominal width is 1.6 mm with standard connections in M6, ¼-28UNF or push-in fittings.
|Type||2-way normally closed|
|Orifice diameter||1.6 mm|
|Number of valves||3 - 12|
|Port Connection||M6, 1/4-28UNF, push-in fittings (optional)|
12 VDC | 24 VDC|
other voltages on request
|Operating Pressure range||
Input: -900 - 2000 mbar|
Output: 0 - 500 mbar
(higher pressures on request)
PTFE and FFKM|
FPM | EPDM (optional)
|Ambient temperature range||5 - 50°C|
neutral and aggressive liquids / gases|
(see resistance lists)
|Dimensions||55.7 x 63.7 x 76.4 mm - 197.2 mm (depending on number of valves)|
Customizable to specific requirements (e.g. higher pressure range, different operating mode, higher temperature range, different operating voltage, different port connections, ...)