Skip to main content

RVA / RVB Series - Rocker valve with diaphragm isolation - 16mm grid width

Orifice diameter 0.8 und 1.6mm

RVA valve series
RVA 3-way valve

Description

2/2-way and 3/2-way rocker type diaphragm isolation solenoid valves with fluid separation.

With 1.6 mm orifice diameter as standard, pressures of up to 2 bar and vacuum of up to -950 mbar are possible at all connections. At 0.8 mm orifice diameter up to 6 bar can be achieved, which makes its use in bidirectional fluidic systems at high pressure or vacuum.

Special designs with optimised pumping volume enable use in demanding analysis applications.

As an option, electronics can be integrated in the valve housing to reduce the holding voltage.

The flange connections of this valve series are available in different dimensions. Contact us for more information.

RVA Ventil Wippenmechanismus

Specifications

Type 2/2-way normally closed < br/>2/2-way normally open < br/>3/2-way
Orifice diameter 1.6 mm (0.8 mm optional)
Port Connection Flange
Rated voltage 12 VDC | 24 VDC
other voltages on request
Operating Pressure range input and output (NC | NO): -950 - 2000 mbar
input and output (NC | NO): -950 - 6000 mbar (optional for 0.8mm Orifice diameter (OD))
Diaphragm material Perfluoroelastomer (FFKM) | EPDM | FPM
Body material PEEK | PPS
Seal material Perfluoroelastomer (FFKM) | EPDM | FPM
Fluid temperature range 0 - 60°C (with diaphragm: EPDM | FPM)
5 - 60°C (with diaphragm: Perfluoroelastomer (FFKM))
Ambient temperature range 0 - 55°C (for diaphragm: EPDM | FPM)
5 - 55°C (for diaphragm: perfluoroelastomer (FFKM))
Power consumption 3.4W
0.85W (with electronics for holding voltage)
Operating duration 100% ED
Mounting direction Any
Fluid Resistant to neutral and aggressive liquids / gases
(see resistance lists)
Dimensions 16.0 x 27.0 x 46.0mm

Customizable to specific requirements (e.g. higher pressure range, different operating mode, higher temperature range, different operating voltage, different port connections, ...)