Skip to main content

Micro dosing valve up to 1500Hz

Dosing speed up to 1500 Hz

Mikrodosierventil ZJ6 Gewinde hinten
Mikrodosierventil ZJ6 rund
Mikrodosierventil ZJ6 Gewinde vorne
Mikrodosierventil ZJ6 Modul
Spule mit Pin ZJ6
Spule mit Kabel ZJ6


  • Dosing media: gases and liquids
  • Fast switching, dosing speed up to 1500 Hz
  • Dosage volume possible from 100 nl
  • Soft sealing valve structure with sapphire and FKM or EPDM
  • High reproducibility
  • Optimized for contactless dosing
  • Grid width from 6 mm


2/2 way NC
Operating pressure range
0-8 bar
up to 500 million cycles tested with water
Viscosity range
1-400 mPa.s
Flow rate at water 1bar pressure
nozzle-ø 0.15 mm 11ml per min.
nozzle-ø 0.3 mm 48ml per min.
Repeat accuracy
<2% with 5µl water
Smallest dosing quantity
100 nl
Internal volume
37 µl
Nozzle diameter
0.15 mm | 0.3 mm
(other sizes on request)
Wetted materials
Sapphire, PEEK, Stainless steel 316L and 1.4105 IL
Port Connection
barbs ø 2.5 inside
round Ø 3.5 / thread M5
Nax. dosing frequency
1500 Hz
Coil resistance
5.7 Ohm
Max. permissible coil temperature
100° C
Electrical connection
solder pins or cable
Typical response time
400 µs
Recommended peak current
24VDC 1A during 400-800µs
Recommended holding current
2VDC 0.2A unlimited time
1.9 g
6 x 9 x 23 mm
Min. screen width
1/4 inch, 6.35 mm
Dosable fluid
Gases, water, reagents, inks, alcohols, DMSO, MEK, other solvents, cells, paints, oils, UV adhesives, etc.


We offer various controllers for the micro-jet valves. From individual controllers to controllers for up to 16 valves. You can find out more about this in the section of the controllers for micro-jet valves.