Skip to main content

FV Series - Ultra miniature diaphragm isolation solenoid valve

Orifice diameter 0.4mm

FV Overview
FV Barb type
FV Manifold-mount
FV Manifold modul

Description

2/2-ways ultra miniature solenoid valves with media separation.

With an orifice diamater of 0.4mm and external dimensions of only 4.2 x 4.2 x 23.1mm, this valve is ideally suited for microfluidic applications with the highest demands.

This inert valve is also available in latching version (FLV series). This reduces both power consumption and heat generation to a minimum.

Specifications

Type
2/2-way normally closed
Orifice diameter
0.4 mm
Port connection
hose barbs | flange
Rated voltage
5 VDC | 12 VDC (other voltages on request)
Operating pressure range
input: 0 - 1000 mbar
output: 0 - 500 mbar
Diaphragm material
Perfluoroelastomer (FFKM) | FPM
Body material
PEEK | PPS
Seal material Perfluoroelastomer
(FFKM) | FPM
Fluid temperature range
10 - 50°C
Ambient temperature range
10 - 50°C
Power consumption
1 W (5 VDC) | 1.2 W (12 VDC)
Operating duration
40% ED
Temperature heating of the coil
Max. 80°C above ambient temperature
Max. switching time
1.5 minutes
Mounting direction
Any
Internal volume
1.1µl | 1.5µl | 4.3µl (depending on housing)
Fluid
resistant to neutral and aggressive liquids / gases (see resistance lists)
Dimensions
4.2 x 4.2 x 23.1 mm
(depending on model, height varies depending on fluidic connection)

Customizable to specific requirements (e.g. higher pressure range, different operating mode, higher temperature range, different operating voltage, different port connections, ...)

Downloads